White Outdoor 10.5-28 Manuale delle Istruzioni

Navigare online o scaricare Manuale delle Istruzioni per Sparaneve White Outdoor 10.5-28. White Outdoor 10.5-28 Instruction manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 8
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
INSTRUCTION MANUAL
SuperMini™ SonicLaser™
Ultrasonic Level Transmitter
HiTECH Technologies, Inc.
301 Oxford Valley Road - Building 505A - Yardley, PA 19067-7706
Tel: 215. 321. 6012; Fax: 215. 321. 6067
Tech Support (Toll Free) 866-DrLevel or 888-NIVELCO
Web Site: www.DrLevel.com or www.hitechtech.com
Vedere la pagina 0
1 2 3 4 5 6 7 8

Sommario

Pagina 1 - SuperMini™ SonicLaser™

INSTRUCTION MANUAL SuperMini™ SonicLaser™ Ultrasonic Level Transmitter HiTECH Technologies, Inc. 301 Oxford Valley Road - Building 505A -

Pagina 2 - 4. INSTALLATION

1. APPLICATION The SuperMini™ is a non-contacting ultrasonic liquid level transmitter; the transmitter comes with scaleable 4-20 mA output, programmab

Pagina 3 - 5. WIRING

dr Positioning: The optimal position of the SuperMini™ is between r=(0.2 to 0.4)d of the tank. This will prevent unwanted interference caused by dom

Pagina 4 - 6. Programming

TRANSMITTERSupply voltageCurrentOutputRelayOutputShieldingBrownGreenGreyWhiteYellowPinkPower Supply Extending the cable: − When extending the cable,

Pagina 5 - Green LEDRed LED

Touch-Magnet Programming is only possible if the SuperMini™ receives valid echo i.e. “ECHO” LED is lit! In case of SuperMini™ with HART communicatio

Pagina 6

Minimum level, 0%, empty tank (assignment to 4 mA) Place the SuperMini™ at a distance from the target corresponding to the required minimum level. Ac

Pagina 7

Programming relay switch-off point (the level where the relay becomes de-energized) Place the SuperMini™ at a distance from the target corresponding

Pagina 8 - DIMENSIONS

Indication of programming error (by the LEDs) Action LED status = error indicated Correction Attempted programming = blinking twice = No Echo Fi

Commenti su questo manuale

Nessun commento